Versions Compared

Old Version 3

changes.mady.by.user Product Knowledge

Saved on

compared with

New Version 4

changes.mady.by.user Product Knowledge

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

On this page

Table of Contents
minLevel1
maxLevel3
outlinefalse
stylenone
typelist
printablefalse

📋 What’s about

This scenario occurs if you decide to install the push gateway on the same machine. METTERE IMMAGINE

image-20240905-160853.pngImage Added


📁 Docker Compose File

Note

In this paragraph we’ll analyse the

View file
namedocker-compose.yml
file FILE DA CAMBIARE that you need to download. Before running the file, you need to follow the requirements published in next section

In the file you will find as directives:

  • push-gateway for notification system

  • redis for cache

  • redisinsight for dashboard

  • drachtio for the stack SIP. In this case you must consider that in SIP protocol the used default ports are 5060 (for UDP/TCP) and 5061 (for TLS), but on XCALLY the Stack SIP is already present with Asterisk. So for the Stack SIP it’s necessary to insert other ports (a 9999 for UDP/TCP and 9998 for TLS)

  • volumes configuration

  • logging data for logs file

  • restart : always = if the container crashes, it automatically restarts

  • networks section

(blue star) Requirements

Panel
bgColor#EAE6FF

  • Hardware with minimum 1 CPU and 2 GB RAM (but always consider that thisdepends on the expected traffic)

  • You can use all operating systems, that support the required Docker Engine

  • Before running the docker compose file:

    • ensure that Docker Engine is installed on the system where you want to run the containers. If for the push gateway you use the same XCALLY server, Docker Engine is installed by default.
      To verify the Docker installation, you can launch the command docker - v and the output will show you the installed Docker version:
      motion@xc-aws-mil-dev-xc01:~$ docker -v

      Docker version 24.0.7, build afdd53b

    • ensure that Docker Compose is installed, as the docker-compose.yml file will be used to manage the containers. By using the same machine, Docker Compose is installed by default.
      To verify if the Docker Compose is correctly installed you can launch the command docker compose versionand the output will show you the installed Docker compose version:
      motion@xc-aws-mil-dev-xc01:~$ docker compose version

      Docker Compose version v2.21.0

  1. Environment Variables Configuration:

  • Some environment variables are required for the services to function correctly. Make sure to configure them properly before running the docker compose file:

    • DEBUG_LEVEL=info | debug level for the push gateway

    • TOKEN_KEY=xcally.p8 | Token key for authentication

    • TOKEN_KEY_ID=X4R3256H89 | Token key ID

    • TOKEN_TEAM_ID=7WCL6FH953 | Team ID of the token

    • DRACHTIO_HOST=drachtio | Host address of the Drachtio server

    • DRACHTIO_PORT=9022 | Port of the Drachtio server

    • DRACHTIO_SECRET=cymru | Secret for the Drachtio server

So consider that if you decide to define another drachtio name, port, or secret, these data must also be changed in the variables above.

  • Then you can proceed to run che docker compose file

💡 Running the docker-compose.yml File

To run the docker-compose.yml file, follow these steps:

  • Open a terminal or command prompt as root user, pass to motion user, open /home/motion and create the folder named push-gateway

  • Download and open the docker-compose.yml file with a text editor. Modify, if necessary, the environment variables published in requirements and update the content file

  • In the directory where the docker-compose.yml file is located, run the Docker Compose Command to start the containers:

Code Block
docker compose up -d

With this command, Docker Compose will start the containers in the background

immagine-20240614-071616.png

  • Verify Container Startup: to verify the status of the containers, you have to run the command:

Code Block
docker compose ps

You can see the 4 containers correctly present

image-20240614-073114.png

  • Ensure all services listed in the docker-compose.yml file are running correctly

Access RedisInsight:

RedisInsight is the module installed in the docker compose file to view cache content (it works as cache dashboard).

  • Once running, you can access the RedisInsight web interface by opening your browser and navigating to:

Code Block
http://serverIP:5540
Info

As serverIP you need to indicate the IP of the push gateway machine

By default it is created without database and you need to add it, by inserting

  • host : redis

  • use the default port

  • define the desired alias

  • you can test connection

Add database

Every time a mobile app is connected, you will see all the keys saved in cache memory

The services are now running and ready to be used. You can interact with the push gateway, the Redis server, and the Drachtio server as required.

🔥 Configure the firewall

It’s necessary to configure the firewall to accept requests arriving on different ports:

  • 9998 for Drachtio TCP/UDP

  • 9999 for Drachtio TLS

  • 10000-20000 for RTP stream to allow the voice connection. These ports are open during the call but they are used by Asterisk only after having negotiated ports with external phones

  • 5540 for RedisInsight: optional if you want to reach the service from the web to view cache dashboard

👥 How to configure Mobile Agents

In this scenario, when you create Mobile Agents in Staff Sectionyou will need to specify your Push Gateway Address with the correct port.

image-20240905-103018.png

In Staff → Agents → Edit Mobile Agent → Mobile App section → Mobile App Push Gateway you need to specify the push gateway address, that in this case is your IP/XCALLY server address (the same machine you are using) + the specific port used for push gateway (e.g. myxcallyaddress/9999)

Info

You need to indicate the public IP of the server. You can retrieve it by launching the command curl https://ifconfig.me/ip
The output will be a string like this 11.222.33.444root@dialer-beta:~# from which you can copy your IP

Moreover if you want to use TLS protocol (being a secure protocol that requires a certificate) the registered domain must be that of the certificate, so in this field you can apply only the certified domain and not the IP.