...
| Info |
|---|
On the General Settings Tab you can find the SW Update button useful to update the xCALLY version.
|
Socket Settings
Here you can define the information about the Socket Server (the server to which the browsers are connected) and the Socket port.
If you edit these parameters you have to execute the service agisquare restart and service xcally-realtime restart.
Asterisk Manager
Here you can set the Asterisk data (server, port, username and password of the user enabled on that Asterisk machine) and verify if the Asterisk connection is ok by clicking on the Check Connection button.
If you edit these parameters you have to execute the service agisquare restart and service xcally-realtime restart.
Asterisk Network
Here you can manage some advanced Network configuration: it is possible to create a new Localnet (providing the IP Network and Netmask), new Externip (providing the IP Address) and define the STUN Address.
Advanced Settings
This section can be useful to set, for example, the automatic numeration of the SIP that you will create in the SIP section. If you need extensions like ‘1000’ onwards, you can set 1000 as SIP reference value and that number will be incremented every time a new SIP is created.
Cronjob
Here you can define the time interval of the Automatic Database Backup and the Backup Type (Config only or Config + Logs). In order to enable this feature, you have to set the Cronjob and the Automatic Database Backup properties as Active.
In the History table you can download and delete the backups. If there is not enough free memory on the disk you will see a row containing the Backup error, that means that the backup has not been created. The backups are stored in the var/www/html/files/backup directory
| Info |
|---|
Important To activate the cronjob insert a new line in cronjob list: in the linux console run the command crontab -e 0 0 * * * wget http://x.x.x.x/cronjob/ -O (use the internal xcally server ip address). |
Outbound
In the Outbound tab you can set the IP Address (or hostname) and the port of the outbound service.
If you edit these parameters you have to execute the service agisquare restart and service xcally-realtime restart.
